Product Overview
Fits 2016–2020 Ford Mustang Shelby GT350 and GT350R models equipped with the factory 5.2L Voodoo V8, intake manifold, and throttle body.
The Nitrous Express GT350 Nitrous Plate System provides a purpose-built, bolt-on way to add 50 to 300 wheel horsepower to the 5.2L Voodoo. The vehicle-specific plate, direct-plug-in fuel adapter, TPS Autolearn switch, and matched plumbing work together as a complete wet nitrous system without drilling the intake manifold or cutting the factory fuel lines.
At the center of the system is a precision CNC-machined, 0.95-inch-thick billet aluminum plate that installs between the factory throttle body and intake manifold. NX Spraybarless technology introduces nitrous and fuel directly into the incoming airflow for consistent atomization and distribution through the intake manifold.
Lightning Series billet aluminum and carbon fiber nitrous and fuel solenoids provide the flow required for the system's 50–300 wheel-horsepower range while reducing weight. The system includes jetting for 50, 75, 100, 125, 150, 200, 250, and 300 additional wheel horsepower, giving you the flexibility to select the power level that fits your combination.
The included TPS Autolearn wide-open-throttle switch activates the system at wide-open throttle and automatically shuts it off when you release the accelerator. When used with a progressive nitrous controller, the Lightning Series solenoids are recommended for operation at 18–20 Hz.
The plate and system are Made in the USA.
The System Includes:
- Precision CNC-machined 0.95-inch-thick billet aluminum GT350 nitrous plate
- Lightning Series billet aluminum and carbon fiber nitrous and fuel solenoids
- Direct-plug-in factory fuel-line adapter
- Braided stainless steel nitrous feed line
- Nitrous and fuel plumbing
- TPS Autolearn wide-open-throttle switch
- Master arming switch
- Relay and relay wiring harness
- Required O-ring, fittings, wiring, and installation hardware
- Jetting for 50–300 additional wheel horsepower
- Systems ordered with a bottle include the Lightning 500 bottle valve and universal stainless steel bottle brackets
This is a wet nitrous system that supplies supplemental fuel through the included fuel components. A dry configuration is available for vehicles with an aftermarket engine-management system capable of supplying the required enrichment fuel through the injectors. Call Nitrous Express at (940) 767-7694 to order the dry configuration.
Important: Proper fuel-system capacity, ignition setup, bottle pressure, and tuning are required for the selected power level. This system is designed to operate at a bottle pressure of 900-1,050 PSI. An RPM window switch is recommended to deactivate the system before the factory rev limiter.
