Product Overview
Fits 2021+ Ford F-150 models equipped with the 5.0L Coyote V8 and the same factory throttle-body and intake-manifold interface used on the original 2021 application.
The Nitrous Express Ford F-150 5.0L Nitrous Plate System installs between the factory throttle body and intake manifold, providing a clean way to add anywhere from 35 to 250 wheel horsepower without cutting the factory fuel line.
The 1/2-inch-thick plate is CNC-machined from billet aluminum and uses NX Spraybarless technology to deliver nitrous and fuel directly into the intake manifold. The nitrous and fuel solenoids are integrated into the plate for a compact installation with less external plumbing and a simpler installation.
This system comes in a wet configuration with jetting for 35, 50, 75, 100, 125, 150, 200, and 250 wheel horsepower. The included direct-plug-in fuel-line adapter connects the fuel side of the system to the factory fuel line without cutting or permanently modifying the factory line.
The included TPS Autolearn wide-open-throttle switch activates the system at wide-open throttle and shuts it off when the accelerator is released. The integrated solenoids are recommended for operation at 18–20 Hz when used with a progressive nitrous controller.
The plate and system are made right here in the USA for unmatched quality and performance!
The System Includes:
- CNC-machined billet aluminum 5.0L F-150 nitrous plate
- Integrated nitrous and fuel solenoids
- Direct-plug-in factory fuel-line adapter
- Braided stainless steel nitrous feed line
- TPS Autolearn wide-open-throttle switch
- Master arming switch
- Relay and relay wiring harness
- Installation hardware
- Jetting for 35–250 wheel horsepower
- Systems ordered with a bottle include the Lightning 500 bottle valve and universal stainless steel bottle brackets
Fitment Note: Applications with an aftermarket throttle body or intake manifold must maintain the same mounting interface and available clearance.
Dry configurations are also available by calling Nitrous Express at 940-767-7694. A dry configuration requires an aftermarket engine-management system capable of supplying the additional nitrous enrichment fuel through the vehicle's injectors.
