Product Overview
Fits 2010–2015 Chevrolet Camaro SS models equipped with the 6.2L LS3 or L99 engine and 2008–2013 Chevrolet Corvette models equipped with the 6.2L LS3 engine, including 2010–2013 Grand Sport models.
The Nitrous Express 5th Gen Camaro SS and C6 Corvette Nitrous Plate System installs between the factory throttle body and intake manifold, providing a clean way to add 75 to 225 wheel horsepower.
The 0.392-inch-thick plate is CNC-machined from billet aluminum and uses NX Spraybarless technology to deliver nitrous and fuel directly into the intake manifold through the thinnest LS3 plate on the market! Lightning Series nitrous and fuel solenoids are integrated into the plate for a compact installation with less external plumbing and no need for separate solenoid mounting brackets.
This system comes in a wet, single-stage configuration with jetting from 75 to 225 wheel horsepower. The included braided fuel line connects to the Schrader valve port on the factory fuel rail, eliminating the need to cut or permanently modify the factory fuel line.
The included TPS Autolearn wide-open-throttle switch activates the system at wide-open throttle and shuts it off when the accelerator is released. The integrated Lightning Series solenoids are recommended for operation at 18–20 Hz when used with a progressive nitrous controller. The system is designed to operate at 900-1,050 PSI bottle pressure for consistent delivery and advertised power output.
The plate and system are made right here in the USA.
The System Includes:
- CNC-machined billet aluminum nitrous plate
- Integrated Lightning Series nitrous and fuel solenoids
- Braided stainless steel nitrous feed line
- Braided fuel line for the factory fuel-rail connection
- TPS Autolearn wide-open-throttle switch
- Master arming switch
- Relay, wiring, electrical connectors, and installation hardware
- Jetting for 75–225 wheel horsepower
- Installation instructions
- Systems ordered with a bottle include the Lightning 500 bottle valve and universal stainless steel bottle brackets
Fitment Note: This system fits the factory 90 mm four-bolt throttle-body and intake-manifold interface used on the listed LS3 and L99 applications. Vehicles with an aftermarket intake manifold or throttle body must retain the compatible factory mounting pattern and provide sufficient clearance for the 0.392-inch-thick plate.
This system is not intended for Camaro ZL1, Camaro Z/28, Corvette Z06, Corvette ZR1, or Corvette 427 models.
Dry configurations are also available by calling Nitrous Express at 940-767-7694. A dry configuration requires an aftermarket engine-management system capable of supplying the additional nitrous enrichment fuel through the vehicle's injectors.
