Product Overview
Fits 2009–2024 Nissan GT-R R35 models equipped with the factory dual throttle bodies and matching intake-manifold interface. This includes the Premium, Pure, Black Edition, Track Edition, NISMO, 50th Anniversary, Midnight Opal, T-spec, T-spec Takumi, and Skyline Edition models that retain the factory mounting configuration.
The Nitrous Express R35 GT-R Nitrous Plate System uses two vehicle-specific billet aluminum plates to add 50 to 150 wheel horsepower. Each 0.797-inch-thick plate installs between the factory throttle bodies and the intake manifold, placing nitrous and fuel directly into both sides of the incoming airflow without drilling or permanently modifying the intake manifold.
This wet, single-stage system includes jetting for 50, 75, 100, 125, and 150 additional wheel horsepower. Each plate uses its own nitrous and fuel jets to provide balanced delivery across the twin-throttle-body intake system. The supplied jetting chart includes calibrations for gasoline and E85 at 40 PSI of fuel pressure.
A 15200L Lightning Series nitrous solenoid and 15201L Lightning Series fuel solenoid supply both plates through the included application-specific plumbing. Both solenoids feature billet aluminum and carbon-fiber construction and are recommended for operation at 18–20 Hz when used with a progressive nitrous controller.
The direct-plug-in fuel-line adapter connects to the factory fuel system without cutting the original fuel line. The TPS Autolearn wide-open-throttle switch activates the system at wide-open throttle and shuts it off when the accelerator is released.
The plates and system are made in the USA.
The System Includes:
- Two CNC-machined 0.797-inch-thick billet aluminum R35 GT-R nitrous plates
- 15200L Lightning Series nitrous solenoid
- 15201L Lightning Series fuel solenoid
- Direct-plug-in fuel-line adapter
- 4AN braided stainless steel nitrous feed line
- Application-specific nitrous and fuel plumbing
- TPS Autolearn wide-open-throttle switch
- Master arming switch
- Relay and relay wiring harness
- Solenoid mounting brackets
- Required fittings, wiring, and installation hardware
- Jetting for 50–150 additional wheel horsepower
- Systems ordered with a bottle include the Lightning 500 bottle valve and universal stainless steel bottle brackets
Operating Note: Maintain 900–1,050 PSI bottle pressure and confirm proper fuel system capacity, fuel pressure, ignition timing, spark plug selection, fuel quality, and tuning at the selected power level. An RPM window switch is recommended to prevent activation below the safe operating range and deactivate the system before the rev limiter.
Dry configurations are available by calling Nitrous Express at 940-767-7694. A dry configuration requires aftermarket engine management capable of supplying the additional nitrous enrichment fuel through the vehicle's injectors.
