Product Overview
The NX Purge System is designed to purge the air from your nitrous lines to allow immediate activation of your Nitrous system. This System includes a Lightning solenoid, a push-button activation, and a vent tube to direct purged nitrous out of the solenoid. Included is a 1/8th NPT to 1/8th NPT fitting. This allows you to connect and take advantage of the built-in purge port of Lightning and Iceman solenoids. The Purge system can also be used to lower the bottle pressure for spot-on nitrous performance whenever you activate it.
Purge System includes:
- Purge Solenoid
- Push button activation
- 1/8 to 1/8 NPT Fitting
- 1/8 NPT to Compression Fitting
- 7 inches of 3/16" Stainless Tubing.
If you use solenoids without a purge port, you will need:
PN 15600 If you run a -4 AN feedline.
PN 15601 If you run a -6 AN feedline.
